Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
625
M6100, M5300, and M7100 Series Managed Switches
8.
From the Interface list
, select the interface to add a binding into the IPv6SG database.
9.
Use MAC Address to specify the MAC address for the binding.
10.
Use VLAN ID to select the VLAN from the list for the binding rule.
11.
Use IPv6 Address to specify valid IP address for the binding rule.
12.
Click the Add button.
The IPv6SG static binding entry is added to the database.
13.
To delete the selected static entries from the database, click the Delete button.
14.
To clear all the dynamic binding entries, click the Clear button.
The following table describes the nonconfigurable IPv6 Source Guard Dynamic Binding
Configuration information that is displayed.
Configuration information that is displayed.
Configure Dynamic ARP Inspection
To configure dynamic ARP inspection (DAI):
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
Table 226. IPv6 Source Guard Dynamic Binding Configuration
Field
Description
Interface
The interface to add a binding into the IPSG database.
MAC Address
The MAC address for the binding entry.
VLAN ID
The VLAN for the binding entry.
IPv6 Address
Displays valid IPv6 address for the binding entry.
Filter Type
Filter type used on the interface. One is source IPv6 address filter type,
and the other is source IPv6 address and MAC address filter type.
and the other is source IPv6 address and MAC address filter type.