Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Manage Device Security
624
M6100, M5300, and M7100 Series Managed Switches
If IPv6SG port security is enabled, then the packets are not forwarded if the sender MAC
address is not in FDB table and it is not in the DHCP snooping binding database. To
enforce filtering based on MAC address other required configurations are as follows:
address is not in FDB table and it is not in the DHCP snooping binding database. To
enforce filtering based on MAC address other required configurations are as follows:
•
Enable port-security globally.
•
Enable port-security on the interface level.
IPv6SG port security cannot be enabled if IPv6SG is disabled. The factory default is
Disable. Also, you are not allowed to turn off IPv6SG port security while IPv6SG is
enabled.
Disable. Also, you are not allowed to turn off IPv6SG port security while IPv6SG is
enabled.
11.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure IPv6 Source Guard Binding
To configure IPv6 source guard static binding:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Security > Control > IPv6 Source Guard > Binding Configuration.