Soleus SGCAC08ESE Bedienungsanleitung

 12 

so that the rear of 

the air conditioner will be 3/16-inch lower than the 
front. This ensures proper water drainage from 
the air conditioner. 

A projection below the base of the air 

conditioner will require the rear of the platform to be 
7/16-inch lower than the front to create the 3/16-
inch slant from front to rear. 

to the 

side of the house where the platform assembly hit 
the house. The siding-protection board should be 
long enough to span 2 wall studs. 
 
 
 

from the top of the platform assembly. Subtract 
20-5/8 inches. Mark this measurement on the 
plastic window panel, along the longer side. 

between a 

board and a work table, and cut along the cutting 
line with a fine tooth saw. Remove any burrs with 
a file. 

using three screws (Item 17) per channel. 

Make sure hook ends of channels face toward the 
back of unit. 

with the smooth side to the outside. Slide 

the panel frame assembly into the side channels 
of the air conditioner cabinet. Make sure the    
plastic window panel is firmly enclosed on all 
sides by the retainer grooves.