Soleus SGCAC08ESE Bedienungsanleitung

 10 

against side 

of the cabinet. Make sure not to peel the seal strips 
from the window track and cabinet side channels. If 
the panel frame does not fit snugly to the inner 
window sash, secure the panel frame to the sash 
with #8x3/4-inch screws, or #8-32x3/4-inch self- 
threading screws. Use the partially plugged holes in 
the panel frame. Drill 1/8-inch pilot holes for the 
screws. 

the base of the 

unit and fasten it to the front of the platform 
assembly. Use a #8-32x3/4-inch self-threading 
screw. 

The bracket prevents movement of the 

air conditioner (either in or out) after completing the 
installation. 

between 

the vertical sash and the window glass, as shown 
right. 

to lock the 

inner window sash to the base of the outer window 
sash. Use one #8x3/4-inch screw, or #8-32x3/4- 
inch self-threading screw. (Drill 1/8-inch pilot hole). 

First reconnect the coupler plugs, make the exhaust 
control positioned through the front in the proper 
location. Gently push the front into position on the 
cabinet. It should click into place. Then replace the 
retaining screws that holds the panel in place. 
Do not push or pull the front panel louvers. 

To install in windows having no flanges or wood stops 
on the top and side jambs, the channels and panel 
frame must fit against a mating flange (or 1/16-inch 
max. thick angle) attached to the window jambs. 
Figure A shows this angle installed. Figures B & C 
show alternate treatments. On the sash side of the 
opening, the leading corner of the inner sash 

becomes the flange. You can purchase the angle  
Strip locally.