GE RAK6052 Installationsanweisungen
STEP 4
Removal of the chassis from the case
for service
Removal of the chassis from the case
for service
NOTE:
If it becomes necessary to remove the chassis
from the case, the following procedure should be
performed.
performed.
1. Remove the two thumb screws securing the
transition duct to the bottom of the duct adapter.
2. Carefully slide the transition duct forward to
remove it from the chassis.
3. Remove the room cabinet front.
4. Remove the chassis from the case for service.
Transition duct
Right
case side
Left
case side
Top edge
Top edge
Front edge
Front edge
Template for locating
holes for mounting plate
attachment
CAUTION:
Photocopying of this template
may result in a distortion
of the template layout.
Use only the original copy
with each instruction.
Cut along this line and align
template with edges of the case sides.
Two 7/32
″
holes
Two 7/32
″
holes