Whirlpool W10678945D Use & Care Manual

Page of 36
7
Load Size Recommendations
For best results, follow the wet load size recommendations 
noted for each cycle. 
Small load: Fill the dryer drum with 3–4 items, not more 
than 1/4 full. 
Medium load: Fill the dryer drum up to about 1/2 full. 
Large load: Fill the dryer drum up to about 3/4 full.  
Do not pack tightly. Items need to tumble freely.
Selecting the Temp
A High heat setting may be used for drying heavyweight items 
such as towels and work clothes.
A Low to Medium heat setting may be used for drying  
medium-weight items such as sheets, blouses, dresses,  
underwear, permanent press fabrics, and some knits.
Line dry foam, rubber, plastic, heat-sensitive fabrics, bonded,  
or laminated fabrics.
NOTE: If you have questions about drying temperatures for 
various loads, refer to the care label directions.
Items  
to dry:
Cycle:
Temp:
Default 
Time:
Available 
Options:
Cycle Details:
Small loads and 
sportswear
Quick Dry
High
Medium
Low
Extra Low
:45
Speed 
Balanced 
Eco
Wrinkle Shield
For small loads of 3–4 items.
Any load
NOTE: Line dry 
foam, rubber, plastic, 
or heat-sensitive 
fabrics.
Timed Dry
High
Medium
Low
Extra Low
:60
Speed 
Balanced 
Eco 
Wrinkle Shield
Use to dry items to a damp level for items that do 
not require an entire drying cycle. Select a drying 
temperature based on the type of fabrics in your 
load. If you are unsure of the temperature to select 
for a load, select the lower setting rather than the 
higher setting.
Adjust drying time on Timed Dry Cycles
When you select a Timed Dry Cycle, the time  
appears in the display. Use + and – to increase 
or decrease the time in 1-minute increments. 
Touch and hold to change the time in 5-minute 
increments. 
Additional time maybe added, but the 
maximum dry time displayed is 1:40.
Cycle Guide – Timed Dry Cycles
Settings and options shown in 
bold are default settings for that cycle. If settings are changed, the new settings will be remembered 
(except on Quick Dry). If there is a power failure, settings will return to the default. Not all settings and options are available on each 
cycle.