Whirlpool W10678945D Use & Care Manual

Using Your Dryer

Clean the lint screen before each load. Pull the lint screen 

straight up and out. Press tab down and open lint screen. 

Roll lint off the screen with your fingers. Push the lint screen

firmly back into place.
IMPORTANT: Clean lint screen before each dryer use as a 

screen blocked with lint will increase drying time.

WARNING: To reduce the risk of fire, electric shock, or injury to

persons, read the IMPORTANT SAFETY INSTRUCTIONS before 

operating this appliance.

Clean the HybridCare™ Filter when light 

comes on after every 5 cycles. Open filter

door on bottom of the dryer and grab the 

handle to pull out filter. Set filter on the dryer and pull out lint

screen and foam pad on bottom of filter. Roll lint off screen

and foam pad with fingers and place back in filter and then

filter back in filter housing. (There maybe some water in the

filter and this is normal.) For additional cleaning information,

see “Dryer Care.”
IMPORTANT: For best drying performance, clean 

HybridCare™ Filter after every 5th load. Light will  

reset after filter is cleaned and loaded back into  

filter housing.