Whirlpool W10562333B User Manual

Small loads and 

sportswear

Quick Dry

High

Low 

Extra Low 

Air Only

Wrinkle Shield

†

For small loads of 3-4 items

Any load  

NOTE: Select Air 

Only to dry foam, 

rubber, plastic, or 

heat-sensitive fabrics 

Timed Dry

High 

Medium

Low 

Extra Low 

Air Only

Wrinkle Shield

†

 

Use to dry items to a damp level for items that 

do not require an entire drying cycle. Select 

a drying temperature based on the type of 

fabrics in your load. If you are unsure of the 

temperature to select for a load, select the 

lower setting rather than the higher setting.

Small to medium 

loads

Touch 

Up (for 

non-steam 

models)

High 

Medium

Low 

Extra Low 

Air Only

Wrinkle Shield

†

Use this setting to help smooth out wrinkles 

from such items as garments packed in a 

suitcase or garments wrinkled from being left 

in the dryer.

Settings and options shown in 

bold are default settings for that cycle. Not all features and cycles are available on all models.

Not all settings and options are available on each cycle. Default cycle times are estimated in minutes.

Settings and options shown in 

bold are default settings for that cycle.

Not all settings and options are available on each cycle.

Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics. 

Load Size Recommendations
For best results, follow the load size recommendations noted for 

each cycle. 

Small load: Fill the dryer drum with 3-4 items,  

not more than 1/4 full. 

Medium load: Fill the dryer drum up to about 1/2 full. 

Large load: Fill the dryer drum up to about 3/4 full.  

Do not overload. Items need to tumble freely.

When you select a Timed Dry Cycle,  

the default time appears in the display.  

Use the Time Adjust buttons to increase  

or decrease the time in 1 minute  

increments. Press and hold to change  

the time in 5 minute increments. 
The maximum dry time is 90 minutes.

†

  Or Wrinkle Shield

™

 with Steam (on some models). Wrinkle Shield

™

 with Steam is available only with High and Medium Temp settings.

A High heat setting may be used for drying heavyweight  

items such as towels and work clothes.
A Low to Medium heat setting may be used for drying  

medium-weight items such as sheets, blouses, dresses,  

underwear, permanent press fabrics, and some knits.
Use a no-heat (Air Only) setting for foam, rubber, plastic,  

or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures  

for various loads, refer to the care label directions.

†

  Or Wrinkle Shield

™

 with Steam (on some models). Wrinkle Shield

™

 with Steam is available only with High and Medium Temp settings.

Mixed Loads

Enhanced 

Touch Up

High

Wrinkle Shield

† 

Static Reduce

Extended high-heat drying cycle intended to 

help sanitize items such as bedding, towels, 

and baby wear. This cycle is not recommended 

for all fabrics. For best results, run cycle to 

completion, do not interrupt.

Shirts, blouses, and 

slacks

Quick 

Refresh 

(on some 

models)

Wrinkle Shield

†

 

Static Reduce 

Offers stepped drying starting with High heat, 

followed by Medium heat for enhanced fabric 

care and energy savings.