Whirlpool W10562333B User Manual

Press and hold the START/PAUSE button to begin the cycle.

Promptly remove garments after cycle has completed to 

reduce wrinkling. If you will be unable to remove the load 

promptly, select the WRINKLE SHIELD

™

 

option (with or without 

Steam) before pressing START/PAUSE.

You may adjust different settings, depending on whether you 

have selected an Automatic Cycle, or Manual Cycle. See the 

“Cycle Guide” for detailed information.
NOTE: Not all options and settings are available with all cycles. 

Not all cycles are on all models.
Automatic Cycles:

You can select a different Dryness Level, depending on your 

load, by pressing the Dryness Level button. Selecting More, 

Normal, Less, or Damp automatically adjusts the Dryness Level 

at which the dryer will shut off. Once the Dryness Level is set,  

it cannot be changed without stopping the cycle.
Sensor cycles give the best drying in the shortest time. Drying 

time varies based on fabric type, load size, and dryness setting.
Timed Cycles:

When you select a Timed Cycle, the default  

time appears in the display. Use the Time  

Adjust buttons to increase or decrease the  

time in 1 minute increments. Press and hold  

to change the time in 5 minute increments. 

The default temperature may be changed by  

pressing the Temp button until the desired  

drying temperature lights up.

Reduces odors and light wrinkles from small to medium-sized 

loads of dry items. Use the Time Adjust buttons to select the 

time appropriate for the load you want to dry. Cycle time is 

adjustable in 5 minute increments.
Enhanced Touch Up with Steam:

This cycle is best for reducing wrinkles and odors from dry  

garments. Dry time will automatically adjust when the load  

size is sensed. Temperature is selectable.

Add additional options such as Eco Boost, Static Reduce,  

and Wrinkle Shield

™ 

(with or without Steam) by pressing  

the button for that option.
NOTE: Not all options and settings are available with all cycles.

If all your loads on all Automatic Cycles are consistently  

not as dry as you would like or are too dry, you may change 

the default settings to increase or decrease the default  

Dryness Level.
The sensor drying settings on Automatic Cycles can be 

adjusted to adapt to different installations, environmental 

conditions or personal preference. This change is retained 

and will affect all of your Automatic Cycles, not just the  

current cycle/load. 
There are 5 drying settings, they will appear in the time 

display:

01  Factory preset dryness level.  

02  Slightly drier clothes, 15% more drying time. 

03  Much drier clothes, 30% more drying time.

04  Much damper clothes, 30% less drying time. 

05  Slightly damper clothes, 15% less drying time.

NOTE: The settings cannot be changed while the dryer  

is running or paused. The dryer must be in standby mode 

(the Power button is off) to adjust the default settings.

1.  Before starting a cycle, press and hold the DRYNESS 

LEVEL button for 6 seconds. 

2.  Press the DRYNESS LEVEL button to select the dryness 

level shown in the time display: 01, 02, 03, 04, or 05. 

3.  Press START/PAUSE to save the new Dryness Level  

setting.