Whirlpool W10115227B-SP User Manual

Place towel on top of dryer to avoid damaging the surface.

Lift door until top screws in dryer cabinet are in large part of 

hinge slot. Pull door forward off screws. Set door (handle side 

up) on top of dryer. Remove top screws from dryer cabinet.

Open dryer door. Remove bottom screws from dryer cabinet 

side of hinges. Loosen (do not remove) top screws from dryer 

cabinet side of hinges.

Take outer door and rotate it 180º and set it back down on 

inner door. Be certain to keep cardboard spacer centered 

between doors. Reattach outer door panel to inner door 

panel so handle is on the side where hinges were just 

removed. Insert 5 door screws.

Remove screws at top, bottom, and side of door  

(5 screws). Keep door screws separate from hinge screws  

as they are different sizes. Holding door over towel on  

dryer, grasp sides of outer door and lift to separate it  

from inner door. 

noTE: Do not pry apart with putty knife or screwdriver.  

Do not pull on door seal or plastic door catches.

Remove screws attaching hinges to door.