Hearth & Home Technologies 5100-I User Manual

Page 15

 

January 30, 2004

R

250-1960  Rev B

STANDARD   

Size:  30-1/2” h x 47”w

831-1452, Gold Trim

SP-51S-NL, Nickel Trim

Do not tighten sides until 

top is locked into place

Panel brackets

View of "L" Bracket 

installed

Kit Includes:  (2) Side Panels, left & right; (1) Panel Top & Fastener package; (2) Side Trim, left & right; (1) Trim Top & Fastener package.

Tools Needed:  Powered Phillips head screw driver and a long handled Phillips screw driver .

1. Loosely install the 2 side panels, do not tighten, using the 

cage nuts already attached to the stove. (Note: The sides are 

not interchangeable).

2. Put top panel in place pushing straight back and then to the 

right to lock onto top of side panels. Attach the top panel 

to the sides using the screw already installed at the top of 

side panels and the panel brackets included in the fasteners 

package.

3. Tighten side panels to the stove using a long handle screw 

driver.  See Figure 15B.

LARGE   

Size:  34-1/4” h x 51-1/4”w

831-1461, Gold Trim

SP-51l-NL, Nickel Trim

1.  Place protective covering on surface to be used to assemble 

the trim pieces.  Lay the trim face down.

2. Attach the 2 side trim pieces to the top trim at each corner 

using  the  “L”  bracket  included  in  fasteners  package.    Slide 

assembled trim over panel set.  See Figure 15C.