Dansons Group FPP Freestanding User Manual

 

Can

adian Comfort Industries      V04                                            

9                                                        

 PELPRO OWNERS MANUAL 

Copyright 2004                                                                     

Dansons Group Inc.

 

 
Unless you are knowledgeable and experienced in stove installation, we recommend your PELPRO stove 
receive a Pre-delivery Check and be installed by your local Specialty Retailer or Certified HVAC Service 
Depot. 

 

_____    Carefully read this "Owner's Manual”. SAVE THIS MANUAL.  

 

_____     Obtain final inspection and approval by local building officials. 

 

_____     Carefully clean all marks off the brass parts before the first fire is lit.  Use a soft cloth and a gentle type 

cleaner.  Caution: Never use an abrasive cleaner on any part of your stove. 

 

_____     Polish the hopper to remove the oil type coating used in manufacturing. 

 

_____     Have your local Dealer demonstrate all the operational, cleaning and maintenance steps necessary 

 

_____     Sign and keep a copy of the Pre-delivery Check List supplied by your Authorized Pelpro Dealer, 

 

_____     Fill the hopper with quality pellets to prime the unit; Using the CCI “AcuTron”, (figure 5), PUSH the 

FEED RATE Touch Pad and this will start the auger and the combustion fan. 

 

NOTE:  Do not attempt to light a fire at this time.  Leave the START / FEED RATE  [ON]  for 2 to 5 minutes until 
pellets start dropping into the burn grate.  Then touch the OFF pad to turn off system .  The auger is now primed to 
deliver fuel to the burn grate (figure 6).  Then light the stove according to the directions outlined in "LIGHTING 
YOUR STOVE",