Lucent Technologies Release 7 User Manual
DEFINITY Enterprise Communications Server Release 7
Maintenance for R7r
Maintenance for R7r
555-230-126
Issue 4
June 1999
Additional Maintenance Procedures
6-47
Automatic Transmission Measurement System (ATMS)
6
Input Parameters - List Testcall Command
ATMS Summary Reports
The ATMS Summary Report summarizes, on a trunk group basis, the collective
results of the latest ATMS tests performed on each trunk group. By interacting
with the trunk group form, it highlights out-of-tolerance measurements. Marginal
trunks are highlighted, and unusable trunks blink, allowing you to quickly identify
out-of-tolerance or unusable trunks.
results of the latest ATMS tests performed on each trunk group. By interacting
with the trunk group form, it highlights out-of-tolerance measurements. Marginal
trunks are highlighted, and unusable trunks blink, allowing you to quickly identify
out-of-tolerance or unusable trunks.
Screen 6-2
shows a typical summary report.
detail
This qualifier specifies a detailed report that shows each measurement
made for each trunk.
made for each trunk.
summary
This qualifier specifies a report that shows totaled results of ATMS tests
for trunk groups as a whole.
for trunk groups as a whole.
grp #
This qualifier specifies a report showing measurements for a specific
trunk group. When used with to-grp, this option specifies the starting
trunk group in a range.
trunk group. When used with to-grp, this option specifies the starting
trunk group in a range.
to-grp
This qualifier specifies a report showing measurements for all trunk
groups from 1 up to the trunk group number entered. When used with
grp, this is the ending trunk group in a range.
groups from 1 up to the trunk group number entered. When used with
grp, this is the ending trunk group in a range.
mem Used
with
grp, this qualifier specifies a report showing measurements for
a specific trunk group member. When used with to-mem, this is starting
trunk group member in a range.
trunk group member in a range.
to-mem
Used with grp, this qualifier specifies display of measurements for all
trunk group members from 1 up to the specified trunk group member
entered. When used with mem, this is the ending trunk group member in
a range.
trunk group members from 1 up to the specified trunk group member
entered. When used with mem, this is the ending trunk group member in
a range.
port
This qualifier specifies display of measurements for the trunk assigned to
a specific port circuit.
a specific port circuit.
result
Only measurements that match the specified result are displayed. Result
IDs include pass, marg, fail, and numerical abort codes.
IDs include pass, marg, fail, and numerical abort codes.
not-result
Only measurement results that do not match the specified result are
displayed.
displayed.
count number
This qualifier limits the total number of records displayed.
print
With this qualifier, the command executes immediately (if resources are
available) and sends output both to the screen and to a printer
connected to the terminal where the command was entered.
available) and sends output both to the screen and to a printer
connected to the terminal where the command was entered.
schedule
With this qualifier, a scheduling form is displayed which allows you to
specify a start time for the command. The command is placed in the
queue and, when executed, sends the output to the system printer.
specify a start time for the command. The command is placed in the
queue and, when executed, sends the output to the system printer.