Fujitsu DX8000 User Manual
Chapter 5 Configuration Menu
>
>
5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
234
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6
Remove the added volume.
Select the volume to remove with the radio button, and click the [Delete] button.
→ The [LUN Concatenation (Deletion Check)] screen appears.
7
Click the [OK] button.
→ The [LUN Concatenation (Concatenation Setting)] screen appears with the selected
volume removed (Not updated in the ETERNUS DX400/DX8000 series yet).
Repeat Steps 6 and 7 to remove more volumes.
Repeat Steps 3 to 5 to add new volumes.
Move to Step 8 when creating the volumes to be concatenated is completed.
Repeat Steps 3 to 5 to add new volumes.
Move to Step 8 when creating the volumes to be concatenated is completed.
•
If the RAID group and/or the capacity of the added volume was
not correct, remove the volume and add a new volume again. It is
impossible to change the RAID group and capacity of the added
volume.
not correct, remove the volume and add a new volume again. It is
impossible to change the RAID group and capacity of the added
volume.
•
When clicking the [Set] button in the following conditions, an error
screen appears.
screen appears.
-
When the [Capacity] is not entered or non-numeric characters
are entered in the [Capacity].
are entered in the [Capacity].
-
When anything other than between 1,024 (MB) and
8,388,607(MB) is entered.
-
When a capacity exceeding the free area (Free) is entered.
The existing volume to be concatenated or existing concatenated
volume cannot be removed.
volume cannot be removed.