Fujitsu DX8000 User Manual
Chapter 5 Configuration Menu
>
>
5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
236
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
10
Click the [OK] button.
→ Returns to the [Menu] screen.
End of procedure
5.2.15
Delete Logical Volume
This function deletes the created volume(s) without stopping ETERNUS DX400/DX8000 series
operations.
operations.
•
If a volume is deleted, access to the data in the volume is lost.
•
If any mapping information exists at volume deletion, the mapping
information related to the deleted volume is also deleted automatically.
information related to the deleted volume is also deleted automatically.
•
Volumes in the following status cannot be deleted. If deletion of such
volumes is attempted, an error is displayed. Also, an error is displayed if
such volumes are a part of the selected range. In this case, no volumes
in the selected range will be deleted.
volumes is attempted, an error is displayed. Also, an error is displayed if
such volumes are a part of the selected range. In this case, no volumes
in the selected range will be deleted.
-
Copy source and destination volumes under EC/OPC/REC
operations.
-
Volumes that are set for extent setting by the bind-in-cache function.
Volumes under EC/OPC/REC operations can be checked using the
[Advanced Copy Status] menu.
[Advanced Copy Status] menu.
•
Volumes under RAID Migration cannot be deleted.
•
Thin Provisioning Volumes that are being balanced cannot be deleted.
•
Snap Data Pool Volumes (SDPV) cannot be deleted using the [Delete
Logical Volume] function. Use the [Set Snap Data Pool] function to
delete an SDPV.
Logical Volume] function. Use the [Set Snap Data Pool] function to
delete an SDPV.