Fujitsu DX8000 User Manual
Chapter 5 Configuration Menu
>
>
5.2 RAID Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
235
Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
8
Click the [Set] button to update the setting in the ETERNUS DX400/DX8000
series.
series.
→ The [LUN Concatenation (Check Setting)] screen appears. The added volumes are
displayed with a yellow background.
9
Concatenate the volume by clicking the [OK] button.
→ The [LUN Concatenation (Updating Configuration Information)] screen appears. After
the process is successfully completed, the [LUN Concatenation (Result)] screen
appears.
appears.
If the [Set] button is clicked when the total capacity of the existing
volume and added volumes exceeds 32 (TB), an error screen
appears.
volume and added volumes exceeds 32 (TB), an error screen
appears.
The [LUN Concatenation] function formats the new volumes to be
added. When exceeding the maximum capacity of volumes that can
be formatted concurrently, a message to that effect appears. Delete
the work volume (TmpOpen volume) created during the LUN
Concatenation process. Wait until the current format process is com-
plete, and then perform the [LUN Concatenation] function again.
added. When exceeding the maximum capacity of volumes that can
be formatted concurrently, a message to that effect appears. Delete
the work volume (TmpOpen volume) created during the LUN
Concatenation process. Wait until the current format process is com-
plete, and then perform the [LUN Concatenation] function again.
The [LUN Concatenation (Result)] screen appears only when the
creating new volumes and format starting process are successfully
completed. Formatting progress can be checked either using the
[Volume List] function or the [RAID Group List] function.
creating new volumes and format starting process are successfully
completed. Formatting progress can be checked either using the
[Volume List] function or the [RAID Group List] function.