SharkRack 45U User Manual

ID-00210-000 

REV D, ECO2773 

Page 24 of 46 

 

 

Adjusting the mounting rails: 

The mounting rails are factory set at 29.12 inches 
apart. However, both the front and rear mounting 
rails are adjustable to any depth within the 
cabinet. 

1. Loosen the screws securing each mounting 

rail using a Phillips screwdriver. 

2. Adjust the mounting rail to the desired location. 

Make sure each mounting rail is adjusted 
parallel and square inside the cabinet.  

3. Tighten the screws. 

4. Repeat steps for any other rail to be adjusted. 

 

Replacing the mounting rails: 

To replace any of the mounting rails you must: 

 

1. Loosen the screws securing the mounting rail. 

CAUTION: Remove bottom screws 
first to help eliminate the possibility of 
the rail falling on your head. 

 

2. Remove the rail and replace with another style 

rail available from SharkRack. 

3. Secure the mounting rail with the screws that 

were previously removed. 

 

Section view of 42U X 37DP Cabinet