Lucent Technologies 6000 User Manual

5-26

   Preliminary January 4, 2001   

MAX 6000/3000 Network Configuration Guide

Configuring Frame Relay
Configuring the MAX as a Frame Relay switch

Following are the RADIUS attributes for configuring a Frame Relay circuit:

Figure 5-10 shows a circuit configuration using UNI-DCE interfaces in the MAX.

The following parameters on the MAX define the datalinks to the MAX and to the Pipeline 
130 (P130-East):

Ethernet

Frame Relay

max

Name=max

Active=Yes

FR Type=DCE

FR Circuit

Circuit name (up to 16 characters). The other endpoint must 
specify the same circuit name. If only one profile specifies a 
circuit name, data received on the specified DLCI is dropped. If 
more than two profiles specify the same circuit name, only two of 
the profiles will be used to form a circuit.

Framed-Protocol (7)

Encapsulation protocol. Both endpoints of a circuit must specify 
FR-CIR (263) encapsulation.

Ascend-FR-Profile-
Name (180)

Name of the Frame-Relay profile that defines the datalink.

Ascend-FR-DLCI (179)

A DLCI for this PVC endpoint. The MAX does not allow you to 
enter duplicate DLCIs, except when they are carried by separate 
physical links specified in different Frame-Relay profiles.

Ascend-FR-Circuit-
Name (156)

Circuit name (up to 16 characters). The other endpoint must 
specify the same circuit name. If only one profile specifies a 
circuit name, data received on the specified DLCI is dropped. If 
more than two profiles specify the same circuit name, only two of 
the profiles will be used to form a circuit.