Enterasys Networks 1H582-xx User Manual
Security Configuration Command Set
Configuring RADIUS
14-3
14.3 SECURITY CONFIGURATION COMMAND SET
14.3.1 Configuring RADIUS
Purpose
To perform the following:
•
Review the RADIUS client/server configuration on the device.
•
Enable or disable the RADIUS client.
•
Set local and remote login options.
•
Set primary and secondary server parameters, including IP address, timeout period, and number
of user login attempts allowed.
of user login attempts allowed.
•
Reset RADIUS server settings to default values.
•
Configure a RADIUS accounting server.
Commands
The commands needed to review and configure RADIUS are listed below and described in the
associated section as shown:
associated section as shown:
•
show radius (
)
•
set radius (
•
clear radius (
•
show radius accounting (
•
set radius accounting (
)
•
clear radius accounting (
)
For an overview on working with Host Access Control Authentication (HACA), refer to
.