Enterasys Networks 1H582-xx User Manual
Security Configuration Command Set
Configuring Port Web Authentication (PWA)
14-65
Example
This example shows how to display PWA information:
provides an explanation of the command output.
Matrix>show pwa
PWA Status - disabled
PWA Hostname - secureharbour
PWA IP Address - 0.0.0.0
PWA Name Services - disabled
PWA Protocol - PAP
PWA Enhanced Mode - disabled
PWA Logo - displayed
PWA Guest Name - guest
PWA Guest Password -
PWA Guest Network Status - disabled
PWA Refresh Time - 30
Port Mode Auth Status QuietPeriod MaxReq
------- ---------------- -------------- ----------- -------
ge.0.1 forceAuthorized authenticated 60 2
ge.0.2 forceAuthorized authenticated 60 2
ge.0.3 forceAuthorized authenticated 60 2
ge.0.4 forceAuthorized authenticated 60 2
ge.0.5 forceAuthorized authenticated 60 2
ge.0.6 forceAuthorized authenticated 60 2
Table 14-7
show pwa Output Details
Output
What It Displays...
PWA Status
Whether or not port web authentication is enabled or
disabled. Default state of disabled can be changed using the
set pwa command as described in
disabled. Default state of disabled can be changed using the
set pwa command as described in
.
PWA Hostname
Host name (URL) for accessing the Secure Harbour login /
logoff web page. Default of secureharbour can be changed
using the set pwa hostname command as described in
logoff web page. Default of secureharbour can be changed
using the set pwa hostname command as described in
.
PWA IP Address
IP address of the end station from which PWA will prevent
network access until the user is authenticated. Set using the
set pwa ipaddress command as described in
network access until the user is authenticated. Set using the
set pwa ipaddress command as described in
.