Manualsbrain.com
  1. Manuals
  2. Brands
  3. Enterasys Networks
  4. 1H582-xx
  5. User Manual

Enterasys Networks 1H582-xx User Manual

Download
Page of 808
Security Configuration Command Set
Configuring Access Lists
14-89
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to clear the SSH configuration:
14.3.7 Configuring Access Lists
Purpose
To review and configure security access lists (ACLs), which permit or deny access to routing 
interfaces based on protocol and source IP address restrictions.
Commands
The commands needed to review and configure security access lists are listed below and described 
in the associated section as shown:
•
show access-lists (
)
•
access-list (standard) (
•
access-list (extended) (
•
ip access-group (
)
14.3.7.1 show access-lists 
Use this command to display configured IP access lists when operating in router mode.
show access-lists [access-list-number]
Matrix>clear ssh config
ROUTER: This command can be executed when the device is in router mode only. 
For details on how to enable router configuration modes, refer to