Enterasys Networks 1H582-xx Manual De Usuario
Security Configuration Command Set
Configuring Access Lists
14-89
Command Mode
Read-Write.
Command Defaults
None.
Example
This example shows how to clear the SSH configuration:
14.3.7 Configuring Access Lists
Purpose
To review and configure security access lists (ACLs), which permit or deny access to routing
interfaces based on protocol and source IP address restrictions.
interfaces based on protocol and source IP address restrictions.
Commands
The commands needed to review and configure security access lists are listed below and described
in the associated section as shown:
in the associated section as shown:
•
show access-lists (
)
•
access-list (standard) (
•
access-list (extended) (
•
ip access-group (
)
14.3.7.1 show access-lists
Use this command to display configured IP access lists when operating in router mode.
show access-lists [access-list-number]
Matrix>clear ssh config