Siemens 2000 User Manual

The display usually shows call charges at the end of a 
call (default setting).
If you wish to display charges continuously during a call 
in progress, your service personnel must request this 
feature from your carrier.
Indication of the cost of a telephone call has to be re-
quested from the service provider and has to be in-
stalled by an authorized technician.
Depending on the setting, during or after the call, the 
display will show the cost of the telephone call.
Some carriers also let you display toll-free external calls. 
The message "Free of Charge" appears on the screen ei-
ther before or during the call.
If the cost indication facility has not been installed, the 
display will show the dialled number and/or the length 
of the telephone call.

The connection charges for the last chargeable call con-
ducted are displayed first. Five seconds later, the total 
accumulated connection charges appear.

Press the key. The LED lights up.

>

:

Select and confirm

1

.

qji

Enter the code.

If a call is transferred, the charges are assigned to 
the telephone to which the call was transferred.

Program/Service

*

[1] ”Different Displays HiPath 4000 Environment”