Siemens 6ED1050-1AA00-0BE8 User Manual

Programming LOGO! 

 

3.8 Configuring additional functions for LOGO! (0BA7 only) 

 

LOGO! 

120

 

Manual, 04/2011, A5E03556174-01 

8.  Press   or   to step into the next screen form for subnet mask setting. The default 

subnet mask is as shown below. To change the setting, press OK. When the cursor 

appears in a solid square, press   or   to move the cursor to a position where you want 

to modify the number, then press   or   to increase or decrease the number. To confirm 

your change, press OK. 

6XEQHWPDVN

 

9.  Press  . LOGO! displays the third screen form for gateway address setting. The default 

gateway is as shown below. To change the setting, press OK. When the cursor appears 

in a solid square, press   or   to move the cursor to a position where you want to modify 

the number, then press   or   to increase or decrease the number. To confirm your 

change, press OK. 

*DWHZD\

 

Transferring the circuit program to LOGO!Soft Comfort 

After you have finished the network settings, you transfer the circuit program from LOGO! to 

LOGO!Soft Comfort using the transfer command LOGO!→PC in LOGO!Soft Comfort. For 

further information on uploading the circuit program to LOGO!Soft Comfort with this transfer 

menu command, refer to the Online Help for LOGO!Soft Comfort V7.0. 

3.8.2 

Configuring a UDF (User-Defined Function) 

You can configure UDF (User-Defined Function) blocks only from LOGO!Soft Comfort.  
A UDF block is a preconfigured circuit program that you create in LOGO!Soft Comfort. You 

can add it to an existing circuit program as you do with a function block. For a detailed 

description of the UDF configuration in LOGO!Soft Comfort, refer to the online help for 

LOGO!Soft Comfort V7.0. 
If your circuit program in LOGO! contains a UDF block, you can configure elements 

connected to the block. For more information of configuration of UDF elements from LOGO! 

0BA7, refer to the topic UDF (User-Defined Function) (0BA7 only) (Page 279).