Siemens 6ED1050-1AA00-0BE8 User Manual

 

Programming LOGO! 

 

3.8 Configuring additional functions for LOGO! (0BA7 only) 

LOGO! 
Manual, 04/2011, A5E03556174-01 

121

 

3.8.3 

Configuring the Data Log 

You can configure the Data Log block only from LOGO!Soft Comfort. 
You can configure a maximum of one Data Log for your circuit program using LOGO!Soft 

Comfort. The Data Log is used to record process measurement variables of the selected 

function blocks. For a detailed description of configuration of the Data Log function in 

LOGO!Soft Comfort, refer to the online help for LOGO!Soft Comfort V7.0. 
If your circuit program in LOGO! contains the Data Log block, you can configure elements 

connected to the block. For more information of configuration of Data Log elements from 

LOGO! 0BA7, refer to the topic Data Log (0BA7 only) (Page 285). 

3.8.4 

Viewing network inputs/outputs 

LOGO!Soft Comfort provides you with the following connectors representing network 

input/output blocks: 
●  Network digital inputs (identified with an NI in LOGO!) 
●  Network analog inputs (identified with an NAI in LOGO!) 
●  Network digital outputs (identified with an NQ in LOGO!) 
●  Network analog outputs (identified with an NAQ in LOGO!) 
Network digital or analog inputs can connect with the inputs of function blocks. Network 

digital or analog outputs can connect with the outputs of function blocks. 
If your circuit program contains a network digital/analog input, LOGO! can read a 

digital/analog value from another circuit program in a networked device. If your circuit 

program contains a network digital/analog output, LOGO! can write its digital/analog output 

value to another networked 0BA7 device in slave mode.  

 

 

Note 
You can only configure these network connectors for your circuit program from LOGO!Soft 

Comfort. If your circuit program in LOGO! contains a network connector, you can not make 

any edits to the circuit program from the LOGO! onboard display.