Manualsbrain.com
  1. Manuals
  2. Brands
  3. Fujitsu
  4. RX300 S2
  5. User Manual

Fujitsu RX300 S2 User Manual

Download
Page of 8
5
1
Insert the ServerStart floppy disk 
supplied with this server, and click 
[Create].
A network setup window for remote installation 
appears.
2
Click [OK].
3
Click [Build a ServerStart Floppy Disk].
The completion message appears.
4
Click [OK].
"
Please Select your keyboard
"
 window appears.
5
Select your keyboard language from 
the drop-down list and click  [OK] .
The subsequent start procedure may take several 
minutes. The [Welcome to ServerStart] window ap-
pears.
6
Click [Click here to prepare and/or initi-
ate an operating system installation].
The [Select the operating system to be installed] 
window appears.
Click [Special Hints on Operating System Installa-
tion] and read the contents.
7
Click[MS Windows Operating Sys-
tems].
8
Click the OS to install.
9
Click[Prepare & initiate an unattended 
installation of (OS)].
The guided mode for the selected OS starts up.
10
Click [Start here to create a complete 
configuration file].
The [Open ServerStart Configuration File] window 
appears.
11
Select the configuration file and click 
[Create].
The wizard starts up automatically.
12
Set the server information.
Click the wizard sequentially, 
and enter the server information.
Clicking [help] under the wizard window displays 
explanations of items and setting hints.
1.
RAID wizard
Configure RAID.
2.
Disk wizard
Create and format hard disk partitions.
3.
(OS) Install wizard
Set the computer information, user infor-
mation, network protocol, etc.
4.
Application wizard
It is recommended to install the applica-
tion selected as default.
13
Click [Close and save Configuration 
File].
Click [Save] and save the configuration file.
14
Click[Click here, to Start the Installation 
of (OS)].
The license window appears.
Follow the window instructions.
Incorrect settings will cause errors to be dis-
played.
Enter correct values manually to continue the 
process.
15
When a message indicating installation 
completion appears press any key.
16
Restart the system.
Click [Start] - [Shutdown]. Select [Restart] and 
click [OK].
17
When the system restarts, log on to 
the server using the Administrators 
account for the local computer.
7
Installing the OS
This section explains the procedures to install the OS using ServerStart.
For details about os installation procedures when not using ServerStart, refer to the "User's Guide".
������������
  "Chapter 4 Manual OS Installation"