Fujitsu RX300 S2 User Manual

Connecting peripheral devices

Peripheral devices, such as the keyboard and mouse, etc., are connected to the server in the following

order.

��

��
��

Attach the slide rail assemblies and

insert the rack nuts into the rack

holes.

Attach slide rails with washers.
Insert latches of the rack nuts from inside of the

rack bracket.

��

Left and right slide rails are different.

Check the letter at the slide rail for correct installa-

tion.

Tightly fasten the binding head screws

on the rear slide rails.

��

Insert the server to fit into the rail as-

sembly inside the rack.

Insert the inner rail of the server to the grooves of

the slide rail and slide the server towards the back

to install to into the rack.

�

��

Rails have lock.

When pulling out the server, press the lock to release.

- Be careful not to pinch your fingers or catch any cloth-

ing when sliding the server into the cabinet. This could

cause injury.

- For the first time installation, make sure to slide the

server backward and fix it to the rack securely.

Fasten the server to the rack.

��

- Dispose unused parts for rack installation.

- Install the attached blank panel to the rack, where

the server or peripheral devices are not installed.