Jenn-Air JES9900 User Manual

Page of 64
17
8. Select the desired function using the left Quickset pad.
9. Select from the displayed temperatures or use the number 
pads to enter the temperature.
10. Select the time to cook from the displayed times or use the 
number pads to enter the cooking time.
The display will show “DELAY TIME,” the selected function, 
the preset temperature and the delay time countdown.
When the delay time has expired, the cook time will be displayed 
and the oven will begin to preheat.
Proofing (on some models)
The Proofing feature can be used to raise yeast-based bread 
products prior to baking. There are two proofing methods 
available – Rapid and Standard.
Standard proofing in the oven avoids damage to dough from 
room temperature changes or drafts that commonly affect 
proofing done on the countertop.
Rapid proofing provides faster proofing results than countertop 
or Standard proofing, without harming the yeast.
To Proof:
1. Press MORE OPTIONS.
2. Use the right Quickset pad to scroll to PROOFING.
3. Select PROOFING using the left Quickset pad.
4. Select RAPID or STANDARD using the Quickset pads.
5. Press CANCEL when finished proofing.
NOTES:
For any dough that requires one rise, either Standard or 
Rapid Proofing can be used.
When using frozen bread dough, choose RAPID PROOFING. 
There is no need to thaw dough before proofing.
For dough requiring 2 rises, Standard Proofing must be used 
for the first rising period. Either Standard or Rapid Proofing 
can be used for the second rise.
If oven temperature is too high for proofing, “OVEN 
COOLING” will appear in the display.
Keep Warm
IMPORTANT: Food must be at serving temperature before 
placing it in the warmed oven. Food may be held up to 1 hour; 
however, breads and casseroles may become too dry if left in the 
oven during Keep Warm.
The Keep Warm feature allows hot cooked foods to stay at 
serving temperature. It can also be used at the end of a timed 
cook.
Follow manufacturer’s recommendations when warming empty 
serving bowls and plates.
To Use:
1. Press MORE OPTIONS.
2. Use the right Quickset pad to scroll to KEEP WARM.
3. Select KEEP WARM using the left Quickset pad.
4. Select one of the displayed temperatures or enter desired 
temperature using the number pads. Temperatures can be 
selected between 145°F and 190°F (63°C and 88°C). 
“KEEP WARM” and the temperature will be displayed. 
“PREHEAT” will be displayed until the programmed 
temperature is reached.
When oven has preheated, a beep sounds and “KEEP 
WARM” and the temperature will be displayed.
5. Press CANCEL when finished.
To Warm Dinner Rolls:
1. Cover rolls loosely with foil and place in oven.
2. Press MORE OPTIONS.
3. Use the right Quickset pad to scroll to KEEP WARM.
4. Select KEEP WARM using the left Quickset pad.
5. Select 170° (77° in Celsius) temperature. Warm for 12 to
15 minutes.
To Warm Plates:
NOTES: 
Use only oven-safe plates. Check with the manufacturer.
To avoid crazing or breakage, do not set warm dishes on a cold 
surface.
1. Place 2 stacks of up to 4 plates each in the oven.
2. Press MORE OPTIONS.
3. Use the right Quickset pad to scroll to KEEP WARM.
4. Select KEEP WARM using the left Quickset pad.
5. Select 170° (77° in Celsius) temperature. Warm for 5 minutes. 
Press CANCEL to turn off the oven and leave plates in the 
oven for 15 minutes more.
Meat Probe
(on convection models)
The meat probe accurately measures the internal temperature of 
meat, poultry and casseroles with liquid and should be used in 
determining the doneness of meat and poultry. It should not be 
used during full and center broiling, convection broiling, 
dehydrating or proofing bread.
Always unplug and remove the meat probe from the oven when 
removing food.
WARNING
Burn Hazard
Use an oven mitt to remove temperature probe.
Do not touch broil element.
Failure to follow these instructions can result in burns.