Lucent Technologies 5 User Manual

Issue 1

June 1997

Managing the System 

Page 6-60

Adding a QCC Operator Position 

o

Assign other buttons, for example, Night Service, Send/Remove Message, 
Camp-On, headset, Auto Dial, Forward, Pickup, or Group Pickup, following 
instructions in Chapter 5, “Centralized Telephone Programming,” of 

System Programming

.

o

Program the telephone features following the instructions for each feature 
in “Optional Telephone Features,” “Optional Group Features,” and “System 
Features” in 

System Programming

, Chapter 3, or in Chapter 5, “Centralized 

Telephone Programming,” of 

System Programming

.

o

When you have finished, file the form(s) with the rest of the planning forms.

6

See the appropriate procedures in 

System Programming

 as noted in the task list 

above.

6

Use this procedure to add a QCC operator position (Hybrid/PBX systems only).

To add a DLC operator position, see the previous section, 

.

6

QCC operator positions can be assigned only to the first and fifth extension jacks 
of an MLX module. The first jack on the first extension module in your system is 
automatically assigned as the primary operator position.

A maximum of four QCC operator positions can be assigned.

When other QCC operator positions are added, the primary QCC operator 
position should be the first one added.

Any combination of operator positions can be assigned as long as there are no 
more than four QCC operator positions and no more than a total of eight operator 
positions (see 

).