Mitsubishi lt-3280 Owner's Manual
Chapter 5: Using the TV Menu
66
Main Menu Choices
Setup Menu
Figure 1
Use the Setup menu to select English or Spanish as the
language for the menus and on-screen displays.
Adjust Color Balance Automatically or manually
(PerfectColor™). Color Balance uses six colors,
Magenta, Red, Yellow, Green, Cyan and Blue to obtain
color balance. Reset the Color Balance to the factory
default settings.
Magenta, Red, Yellow, Green, Cyan and Blue to obtain
color balance. Reset the Color Balance to the factory
default settings.
Choose Side Bar Color of black or gray. View the media
center’s software version on this screen.
center’s software version on this screen.
Figure 1. Main menu, Setup selected
Time Menu
Figure 4
Manually set the time for the media center, or select
Auto and the media center will automatically set the
time based upon Extended Data Service (XDS) time
data. This time data is usually broadcast by your local
PBS station. This menu is also used to set the TV timer.
data. This time data is usually broadcast by your local
PBS station. This menu is also used to set the TV timer.
Figure 4. Main menu, Time selected
Captions Menu
Figure 5
Display Closed Captions if sent by the broadcaster,
select settings for analog or digital captions.
select settings for analog or digital captions.
Figure 5. Main menu, Captions selected
V- Chip Lock Menu
Figure 6
Block or allow programing based upon rating signals
sent by the broadcast station or lock by time.
sent by the broadcast station or lock by time.
Figure 6. Main menu, V-Chip Lock selected
Audio/Video Menu
Figure 7
Reset the A/V Memory to return to the original factory A/V
settings for a selected device. Customize the individual
audio and video settings. Display a blue screen when
viewing a device with no signal.
settings for a selected device. Customize the individual
audio and video settings. Display a blue screen when
viewing a device with no signal.
Figure 7. Main menu, Audio/Video selected
Figure 2. Main menu, NetCommand selected
NetCommand® Menu
Figure 2
Add, change, review or delete NetCommand® settings
and devices. If you have more than one digital recording
device connected, use this menu to change the default
digital Record To device. Turn the transport menu off
and change the order of the icons in the Device Selection
menu. Set up TV Guide On Screen®.
and devices. If you have more than one digital recording
device connected, use this menu to change the default
digital Record To device. Turn the transport menu off
and change the order of the icons in the Device Selection
menu. Set up TV Guide On Screen®.
Antenna Menu
Figure 3
Memorize available analog and digital channels for both
Ant-1 and Ant-2. After memorization, if a channel displays
as digital and analog, you can choose to see the channel
digitally every time it is selected. Manually add or delete
channels from memory, name channels or add your
favorite channels to a SQV (SuperQuickView™) list.
digitally every time it is selected. Manually add or delete
channels from memory, name channels or add your
favorite channels to a SQV (SuperQuickView™) list.
Figure 3. Main menu, Antenna selected