Konica Minolta mc1690mf User Guide
Sending a Fax at a Specified Time (Timer Transmission)
3-14
Sending a Fax at a Specified Time (Timer
Transmission)
A document can be scanned and stored in memory to be sent at a specified
time. This feature is convenient for sending faxes at discounted calling times.
time. This feature is convenient for sending faxes at discounted calling times.
"
When sending multiple documents together to a single destination at a
specified time, batch transmission is useful since only a single con-
nection is required.
specified time, batch transmission is useful since only a single con-
nection is required.
"
If the machine is not programmed with the current time, the fax cannot
be sent at the specified time. For details on specifying the time, refer
to “ADMIN. MANAGEMENT” on page 2-20.
be sent at the specified time. For details on specifying the time, refer
to “ADMIN. MANAGEMENT” on page 2-20.
"
Timer transmission can be combined with broadcast transmission.
1
Position the document to be faxed.
2
If desired, adjust the image quality.
"
The document image quality can be adjusted. For details, refer to
“Adjusting the Image Quality” on page 3-6.
“Adjusting the Image Quality” on page 3-6.
3
Press the + or , key to select TIMER TX, and then press the Select key.
The TIMER TX SETTING screen appears.
The TIMER TX SETTING screen appears.
4
Using the keypad, enter the desired transmission time, and then press the
Select key.
Select key.
"
The time is set in the 24-hour format.
"
If you want to correct the time, press the Back key, and then enter the
correct time.
correct time.
5
Specify the fax number of the recipient.
"
"
To send a broadcast transmission to multiple destinations, refer to
“Sending a Fax to Multiple Recipients (Broadcast Transmission)” on
page 3-11. After all recipients have been specified, press the Start key
to begin scanning. After scanning is finished, the machine with enter a
standby state.
“Sending a Fax to Multiple Recipients (Broadcast Transmission)” on
page 3-11. After all recipients have been specified, press the Start key
to begin scanning. After scanning is finished, the machine with enter a
standby state.
"
If the specified speed dial number is registered with batch transmis-
sion settings, the fax will be sent at the time specified for the batch
transmission.
sion settings, the fax will be sent at the time specified for the batch
transmission.