SATO MB410i User Guide
Unit 3: Setup
MB400i/MB410i Operator Manual
PN 9001190C
Page 3-11
USING THE OPTIONAL AC ADAPTER FOR POWER
If you purchased the optional AC adapter or your printer comes with the supplied AC adapter, the
printer can be operated on AC power instead of the supplied battery pack.
printer can be operated on AC power instead of the supplied battery pack.
Follow the steps below:
Figure 3-11, Connecting the AC Adapter for Power
1. Remove the cover of the printer’s DC input jack and connect the AC adapter’s DC output
terminal to it.
2. Connect the AC adapter to the wall outlet and turn on the power. The POWER lamp turns
green.
N
OTES
:
•
Be sure to turn the printer power off when removing the DC output terminal of AC adapter or
disconnecting the power source. Otherwise, the information stored in the printer may not be
updated.
disconnecting the power source. Otherwise, the information stored in the printer may not be
updated.
•
A battery pack is unnecessary when an AC adapter is used. If a battery pack and an AC
adapter are being used at the same time, the printer will attempt to charge the battery pack (if
it is not already fully charged).
adapter are being used at the same time, the printer will attempt to charge the battery pack (if
it is not already fully charged).
•
The AC adapter set used for this printer is specific to this printer. Do not use it for other elec-
tric equipment.
tric equipment.
$#
!#
$#