SATO MB410i User Guide
Unit 3: Setup
MB400i/MB410i Operator Manual
PN 9001190C
Page 3-13
Figure 3-15, Placing Label Roll into Printer
3. Place the label roll into the printer. Make sure the label roll is placed with the first label feed-
ing from the bottom of the roll and not from the top (see picture). Thermal sensitive side or
exposed label should be facing the tear-off bar or print head.
exposed label should be facing the tear-off bar or print head.
Figure 3-16, Ensuring the Label Roll rotates
4. Turn the label roll lightly by hand and confirm that it rotates smoothly. Otherwise, paper may
not be fed correctly during operation. Close the dial cover.
N
OTE
When replacing a label roll of the same width as that used previously, adjustment of the label
guide is not necessary.
guide is not necessary.