Whirlpool WGD7300X User Manual

3. Loosen the top screw from each of the 2 hinges in Step 2.

4. Remove the dryer door and the hinges by lifting upward 

 

on the door. Lay the door on a flat, protected surface, 

 

with the inside of the door facing up. Remove remaining 
2 loose screws from dryer front panel. 

5. Remove the 4 plastic plugs located outside the dryer 

 

door opening.

6. Install 4 plastic plugs into screw holes in the dryer left where 

the hinges were removed in Step 4.

1. Remove the door strike from the dryer door opening. 
2. Remove the cosmetic screw opposite the door strike.

3. Reinstall the door strike and cosmetic screw on the opposite 

side of dryer door opening from where they were removed.

 

NOTE: Door strike and plugs must be on the same side 

 

of the dryer door opening.

1. Remove the 4 screws and 2 hinges from the dryer door.

2. Replace the 4 screws in the same holes.

3. Remove the 4 screws from the opposite side of the door.

4. Install the 2 hinges to the front panel of the dryer using 

4 screws. Use the non-slotted side to attach the hinge 

 

to the front panel.

5. Install screws in top hinge holes in the door. Do not tighten 

screws. Leave approximately 1/4" (5 mm) of screw exposed.