Bunn single tf brewwise dbc Operating Guide

Page 8

 

This switch, located under the brewer behind the front leg, turns power on and off to all components in the 

brewer.

Pressing the switch corresponding to the Small, Medium, or Large batch selects the amount of coffee to 

be brewed.  Pressing a different switch after a brew cycle has been initiated does not change the brew batch in 

progress. Light indicates the selected batch to brew.

Pressing the ON/OFF switch alternately turns the brewer on and off. Pressing this switch during the brew 

cycle will interrupt the brew cycle, stopping the flow of water. Pressing this switch during the programming of 

the brewer will exit the setup and return to the main screen.

 

Momentarily pressing and releasing this switch begins a brew cycle. 

Pressing and holding the ® switch allows entry to the programming menus. Pressing and releasing the 

switch steps through each function screen during programming.

 

This is the display which shows the various functions of the brewer and allows the programming to be ac-

complished.

 

These are the hidden switches which are used to program the brewer.

 

This is used to "receive" information from the Smart Funnel handle (coffee name and batch size), and also 

from RECIPE CARDS.

 

The upper left corner of the B in BUNN can be used to scroll backwards through the function list.

b

c

d

e

f

g

h

j      

P2725

35879.1 062107

a