KitchenAid 30'' Slow Cook Warming Drawer Installation Guide

3.  It is recommended that if a wood or porous custom drawer 

front is installed, a high-quality spray polyurethane finish be 

applied to the inner wood surface.

4.  For the lens, drill a 

5

⁄

16

" (7.9 mm) diameter hole through the 

appearance side of the custom drawer front. This hole will 

allow the “ON” Indicator Light to be visible through the 

custom drawer front. To secure the lens, use an adhesive 

specified for plastic-to-wood application.

5.  Install custom handle (not supplied) through custom 

drawer front.

6.  The custom drawer front is fastened to the stainless steel 

drawer by driving 6 screws through clearance holes in the 

drawer front into the wooden or other custom made panel.