Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch Software Guide
Quality of Service Commands
1085
M5300, M6100, and M7100 Series ProSAFE Managed Switches
Command example:
(NETGEAR Routing) #show ip access-lists ip1
ACL Name: ip1
Inbound Interface(s): 1/0/30
Rule Number: 1
Action......................................... permit
Starting Source L4 port
The starting source layer 4 port.
Ending Source L4 port
The ending source layer 4 port.
Starting Destination L4 port
The starting destination layer 4 port.
Ending Destination L4 port
The ending destination layer 4 port.
ICMP Code
Note:
This is shown only if the protocol is ICMP.
The ICMP message code for this rule.
Fragments
If the ACL rule matches on fragmented IP packets.
Committed Rate
The committed rate defined by the rate-limit attribute.
Committed Burst Size
The committed burst size defined by the rate-limit attribute.
Source IP Address
The source IP address for this rule.
Source IP Mask
The source IP Mask for this rule.
Source L4 Port Keyword
The source port for this rule.
Destination IP Address
The destination IP address for this rule.
Destination IP Mask
The destination IP Mask for this rule.
Destination L4 Port Keyword
The destination port for this rule.
IP DSCP
The value specified for IP DSCP.
IP Precedence
The value specified IP Precedence.
IP TOS
The value specified for IP TOS.
Log
Displays when you enable logging for the rule.
Assign Queue
The queue identifier to which packets matching this rule are assigned.
Mirror Interface
The unit/slot/port to which packets matching this rule are copied.
Redirect Interface
The unit/slot/port to which packets matching this rule are forwarded.
Time Range Name
Displays the name of the time-range if the IP ACL rule has referenced a time range.
Rule Status
Status (Active/Inactive) of the IP ACL rule.
Term
Definition