Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch Software Guide

Match All...................................... FALSE

Protocol....................................... 1(icmp)

Committed Rate................................. 32

Committed Burst Size........................... 16 

This command displays IP ACLs, IPv6 ACLs, and MAC access control lists information for a 
designated interface and direction. The unit/slot/port

parameter specifies a valid 

interface for the system. Instead of unit/slot/port, lag

 

 can be used as 

an alternate way to specify the LAG interface, in which lag-intf-num is the LAG port 
number.

Use the control-plane keyword to display the ACLs applied on the CPU port.

(NETGEAR Switch) #show access-lists interface control-plane

ACL Type 

 

       ACL ID       

 

                   Sequence Number

--------         -------------------------------  ---------------

IPv6

 

            ip61 

 

                           1

This command displays Access List information for a particular VLAN ID. The vlan-id

parameter is the VLAN ID of the VLAN with the information to view. The in and out options 
specify the direction of the VLAN ACL information to view.

Format

show access-lists interface {unit/slot/port {in | out | control-plane}}

Mode

Privileged EXEC

ACL Type

Type of access list (IP, IPv6, or MAC).

ACL ID

Access List name for a MAC or IPv6 access list or the numeric identifier for an IP access list.

Sequence Number

A sequence number indicates the order of the access list relative to other access lists already 

assigned to this interface and direction.

in or out

in – Display Access List information for a particular interface and the in direction.

out – Display Access List information for a particular interface and the out direction.

Format

show access-lists vlan vlan-id [in | out]

Mode

Privileged EXEC