Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch Software Guide
IPv6 Multicast Commands
1172
M5300, M6100, and M7100 Series ProSAFE Managed Switches
no ipv6 mld query-interval
Use this command to reset the MLD query interval to the default value for that interface.
ipv6 mld query-max-response-time
Use this command to set the MLD querier’s maximum response time for the interface or
range of interfaces and this value is used in assigning the maximum response time in the
query messages that are sent on that interface. The range for the milliseconds argument
is from 0 to 65535 milliseconds.
range of interfaces and this value is used in assigning the maximum response time in the
query messages that are sent on that interface. The range for the milliseconds argument
is from 0 to 65535 milliseconds.
no ipv6 mld query-max-response-time
This command resets the MLD query max response time for the interface to the default value.
ipv6 mld last-member-query-interval
Use this command to set the last member query interval for an MLD interface or range of
interfaces, which is the value of the maximum response time parameter in the group specific
queries sent out of this interface. The range for the milliseconds argument is from 0 to
65535 milliseconds.
interfaces, which is the value of the maximum response time parameter in the group specific
queries sent out of this interface. The range for the milliseconds argument is from 0 to
65535 milliseconds.
no ipv6 mld last-member-query-interval
Use this command to reset the last-member-query-interval
of the interface to the
default value.
Format
no ipv6 mld query-interval
Mode
Interface Config
Default
10000 milliseconds
Format
ipv6 mld query-max-response-time milliseconds
Mode
Interface Config
Format
no ipv6 mld query-max-response-time
Mode
Interface Config
Default
1000 milliseconds
Format
ipv6 mld last-member-query-interval milliseconds
Mode
Interface Config
Format
no ipv6 mld last-member-query-interval
Mode
Interface Config