Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Software Guide
IPv6 Commands
924
M5300, M6100, and M7100 Series ProSAFE Managed Switches
Note:
This command is supported on M6100 series switches only
no serviceport ipv6 address
Use the command no serviceport ipv6 address to remove all configured IPv6
prefixes on the service port interface.
prefixes on the service port interface.
Use the command with the address option to remove the manually configured IPv6 global
address on the network port interface.
address on the network port interface.
Use the command with the autoconfig option to disable the stateless global address
autoconfiguration on the service port.
autoconfiguration on the service port.
Use the command with the dhcp option to disable the dhcpv6 client protocol on the service
port.
port.
serviceport ipv6 gateway
Use this command to configure IPv6 gateway information (that is, default routers information)
for the service port.
for the service port.
Note:
Only a single IPv6 gateway address can be configured for the service
port. There may be a combination of IPv6 prefixes and gateways that
are explicitly configured and those that are set through auto-address
configuration with a connected IPv6 router on their service port
interface.
port. There may be a combination of IPv6 prefixes and gateways that
are explicitly configured and those that are set through auto-address
configuration with a connected IPv6 router on their service port
interface.
Format
serviceport ipv6 address {address/prefix-length [eui64] | autoconfig | dhcp}
Mode
Privileged EXEC
Parameter
Description
address
IPv6 prefix in IPv6 global address format.
prefix-length
IPv6 prefix length value.
eui64
Formulate IPv6 address in eui64 address format.
autoconfig
Configure stateless global address autoconfiguration capability.
dhcp
Configure dhcpv6 client protocol.
Format
no serviceport ipv6 address {address/prefix-length [eui64] | autoconfig |
dhcp}
Mode
Privileged EXEC