Netgear XS716E – ProSAFE® 10-Gigabit Ethernet Web Managed (Plus) Switch User Manual
Network Settings
27
ProSAFE 10-Gigabit Ethernet Web Managed Switch
Use Browser-Based Access to Specify LAG Membership and
Enable LAGs
Enable LAGs
You must set up LAG membership before you can enable LAGs.
To specify LAG membership and enable a LAG:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
off-network using an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
The login window opens.
4.
Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Information page displays.
5.
Select System > LAG > LAG Membership.
6.
In the LAG ID menu, select the LAG ID.
The switch supports four static LAGs.
7.
Select the ports for the LAG by selecting the associated check boxes under the port
numbers.
numbers.
A LAG consists of at least two ports.
8.
Click the Apply button.
Your settings are saved.
9.
Select System > LAG > LAG Configuration.