Netgear XS716E – ProSAFE® 10-Gigabit Ethernet Web Managed (Plus) Switch User Manual
Network Settings
28
ProSAFE 10-Gigabit Ethernet Web Managed Switch
10.
Select the ID of the LAG for which you just set up the port membership.
11.
In the Admin Mode menu, select Enable.
12.
Click the Apply button.
Your settings are saved.
Use the ProSAFE Plus Utility Specify LAG Membership and
Enable LAGs
Enable LAGs
You must set up LAG membership before you can enable LAGs.
To specify LAG membership and enable a LAG:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
off-network using an Ethernet cable.
2.
Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
the local network.
3.
Select the switch.
If you do not see the switch, click the REFRESH button.
4.
Click the APPLY button.
You are asked to enter the password for the switch.
5.
Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6.
Select System > LAG > LAG Membership.