APC Rack Automatic Transfer Switch, 12A, 230V SU043 User Manual
Product codes
SU043
APC Redundant Switch: Installation and Operation Manual
17
Operation
Front panel
programmable
settings
programmable
settings
The following programmable settings are accessible using
controls located on the Redundant Switch front panel.
controls located on the Redundant Switch front panel.
Function Select LED Indicator. The three green Function
Select
Select
LED
s indicate which user programmable parameter is
selected for status display or modification. Use the left
selection button to cycle through the five configurable items
defined in “Controls, LEDs, and ports on the front panel” on
page 15.
selection button to cycle through the five configurable items
defined in “Controls, LEDs, and ports on the front panel” on
page 15.
Function Status LED Indicator. The green Function Status
LED
indicates the state of the selected user programmable
function. Use the Select button to cycle among the choices.
AC Source LED Indicator. The green online
LED
indicates
the line quality and selection status of each source:
Source Sensitivity and Transfer Voltage.
APC
recommends
that you do not change these settings, which are correct for
most conditions. See “Controls, LEDs, and ports on the front
panel” on page 15.
most conditions. See “Controls, LEDs, and ports on the front
panel” on page 15.
LED Display
Status of Source
Bright
Source is selected.
Dim
Source is
OK
, but not
selected.
Off
Source is not
OK
.
One
LED
is flashing once per
second, and the other
LED
is off
Both AC sources are out of
tolerance.
tolerance.