Cisco Cisco Prime Optical 10.6 Developer's Guide
Cisco Prime Optical 10.6 GateWay/CORBA Programmer Reference Guide
185
• EquipmentObjectType_T expectedEquipmentObjectType
• globaldefs::NamingAttributes_T equipmentHolderName
– Supported.
• globaldefs::NVSList_T additionalInfo
– Supported only for client port on 100G-CK-C card provisioned in TXP-100G mode.
Parameter
NE Type
Valid Value
Supporting
Equipment and
Restrictions
Equipment and
Restrictions
nrOfLanes
ONS15454 SONET,
ONS15454 SDH,
ONSNCS2K
SONET,
ONSNCS2K SDH
ONS15454 SDH,
ONSNCS2K
SONET,
ONSNCS2K SDH
4 or 10, integer value.
100G-CK-C
card
provisioned in
TXP-100G
mode, write
only parameter
card
provisioned in
TXP-100G
mode, write
only parameter
This interface is not applicable for configuring payloads for client ports in TXP_MR_10G.
Throws
Throws
Compliance
TMF-defined.
TMF-defined.
3.6.10 setAlarmReportingOff
Synopsis
Description
This interface disables alarm reporting on a piece of equipment. If successful, Prime Optical sends a
warning alarm notification. For optical NEs, the interface supports the node names as equipment only
when the NE alarms are configured with "off."
Parameters
This interface disables alarm reporting on a piece of equipment. If successful, Prime Optical sends a
warning alarm notification. For optical NEs, the interface supports the node names as equipment only
when the NE alarms are configured with "off."
Parameters
Name
Type
Input/
Output
Output
Description