Siemens gigaset c100 dect User Manual

Gigaset C100 / englisch / A31008-C100-J101-1-7619 / pabx.fm / 24.06.2003

You can set the length of the pause that is inserted between pressing the top half of the 

c

 key and the transmission of the telephone number (the default setting is 3 seconds). 

You can change the length of the pause if your PABX requires this (refer to the operating 

instructions for your PABX; the default setting is 800 ms). 

If your PABX still operates with dial pulsing (DP) but tone dialling (DTMF) is required for 

a particular call (e.g. to check your network mailbox), you must switch to tone dialling 

during the call.
Precondition: A call is in progress.

[______________]

Press the display key to open the menu.

 

 

 

Press keys. 

[_______]

Enter a number for the length of the pause 

(1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.; 4 = 2.5 sec.) 

and confirm. 

[______________]

Press the display key to open the menu.

 

 

 

Press keys. 

[_______]

Enter a number for the length of the pause 

(1 = 800 ms; 2 = 1600 ms; 3 = 3200 ms) 

and confirm. 

[______________]

Press the display key to open the menu.

 

 

 

Press keys. 

[_______]

Enter a number for the length of the pause 

(1 = 1 sec.; 2 = 2 sec.; 3 = 3  sec.;  4 = 6 sec.) 

and confirm. 

[______________]

Press the display key to open the menu.

[__________] [_____________________________________________________________]

Tone dialing 

[_________]

Select the menu item and confirm. Tone dialling is 

now activated for this call.