Siemens gigaset c100 dect User Manual

Gigaset C100 / englisch / A31008-C100-J101-1-7619 / appendix.fm / 24.06.2003

Wipe the base and the handset with a damp cloth (use no solvent) or an antistatic cloth. 

Never use a dry cloth as this can cause static discharge! 

If the handset should come into contact with liquid, on no account switch the device 

on. Remove all batteries immediately.
Allow the liquid to drain out of the device, and then pat all parts of the device dry.
Keep the handset with the batteries removed in a warm, dry place for at least 72 hours. 

In many cases, you will then be able to use it again.

www.my-siemens.com/customercare. You will find the most frequently asked ques-

tions and answers below.

… the display is blank?

The handset is not switched on.

The batteries are flat.

Press the 'end call' key 

a

 for 

around 2 sec..

Charge or replace the batteries 

… the handset fails to respond 

to a key press?

The keypad lock is activated.

Press the hash key 

R

 for 

around 2 sec. (page 10) to 

deactivate the lock.

… "Base x" flashes in the dis-

play?

The handset is outside the range 

of the base.

The base is not switched on.

Move the handset nearer to the 

base.

Check the power connector at 

the base (page 7).

… an internet address appears 

in the display?

The automatic registration of 

your handset to the base has 

been interrupted.

Register your handset manu-

ally (page 53). 

… (when using more than one 

handset) the handset that is in 

the base does not charge?

The base will not charge the 

handset if telephoning is simul-

taneously in progress.

Use an additional charger.

… the handset or the base 

C 150 does not ring?

The ringer is switched off.

Call Diversion is set to All Calls.

Switch on the ringer in the 

handset (page 59) or base 

C 150  .

Switch off Call Diversion 

… I can hear no ringer tone/

dial tone?

You have changed the telephone 

cord on your Gigaset.

When purchasing a new cord 

ensure that it has the correct 

pin assignment (page 7).

… the other party cannot hear 

me?

You have pressed the INT key. 

This mutes the handset.

Switch on the microphone 

again (page 18).