Siemens TC63 User Manual

s

TC63_ATC_V00.490

Page 174 of 501

5/24/05

Confidential / Draft - Do not copy

The 

 command enables the ME to accept incoming calls when no bearer capability information is pro-

vided with the call, e.g. single numbering scheme calls or calls originitating from analog devices. 

[0]

(D)

Voice: Each call received without bearer element is assumed to be speech

2

Fax: Each call received withoutbearer element is assumed to be an incoming

fax.

4

Data: Each call received without bearer element is assumed to be a data call.

Please take into account that the bearer service parameters set with 

apply to all data calls including those received without bearer capability. 

• The command must be set before the call comes. By default, when you do not modify the settings, all calls

received without bearer element are assumed to be voice. 

• The setting will be automatically saved when you power down the GSM engine with 

, provided that

PIN authentication has been done. This value will be restored when PIN authentication is done again. 

Test Command

AT+CSNS=?

Response(s)

+CSNS: 

(list of supported

s)

OK

Read Command

AT+CSNS?

Response(s)

OK

Write Command

AT+CSNS=

[

Response(s)

OK

ERROR

+CME ERROR

Reference(s)

PIN

ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge

4

Last

GSM 07.07

!

%

%

%

%

%

%

!

%

!

<mode>

(num)