Siemens TC63 User Manual
TC63 AT Command Set
11.6 AT+CGDCONT
s
TC63_ATC_V00.490
Page 277 of 501
5/24/05
Confidential / Draft - Do not copy
11.6
AT+CGDCONT Define PDP Context
Syntax
Command Description
The test command returns supported values as a compound value.
The read command returns the current settings for each defined PDP context.
The write command specifies the parameters for a PDP context identified by the context identifier
The read command returns the current settings for each defined PDP context.
The write command specifies the parameters for a PDP context identified by the context identifier
. The
number of contexts that may be in a defined state at the same time is given by the range returned by the test
command. A special form of the write command (
) causes the values for context
become undefined.
Parameter Description
PDP Context Identifier
Parameter specifies a particular PDP context definition. The parameter is local to the TE-MT interface and is
Parameter specifies a particular PDP context definition. The parameter is local to the TE-MT interface and is
used in other PDP context-related commands.
1...2
1...2
Packet Data Protocol type
Specifies the type of the packet data protocol.
“IP“
Specifies the type of the packet data protocol.
“IP“
Internet Protocol (IETF STD 5)
Test Command
AT+CGDCONT=?
Response(s)
+CGDCONT:
(range of supported
s), (list of supported
s)
OK
ERROR
+CME ERROR
Read Command
AT+CGDCONT?
Response(s)
[+CGDCONT:
[+CGDCONT: ...]
OK
OK
ERROR
+CME ERROR
Write Command
AT+CGDCONT=
[
]]]]]]
Response(s)
OK
ERROR
+CME ERROR
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
GSM 07.07
%
%
%
%
%
%
%
!
%
!
<cid>
(num)
<PDP_type>
(str)