Inter-Tel 8520 User Manual

Inter-Tel

®

 Model 8520 User Guide

Speed dialing allows you (and your system administrator) to store and access fre-
quently dialed numbers. Each number is stored in your endpoint (Station Speed Dial)
or in the telephone system (System Speed Dial) and is identified by a location num-
ber. Once programmed, you can quickly dial these numbers by entering a feature code
and dialing the desired location number. Because the system supports both Station and
System Speed-Dial numbers, you can have access to over 1000 stored numbers. 

You can program and use up to ten personal speed-dial numbers on your endpoint. In
addition, if you have programmable feature buttons, you can program them as speed-
dial buttons for one-touch dialing. To use a speed-dial button, you must:
 • Store the number in a speed-dial location.
 • Program an available feature button as a speed-dial button.
 • Associate a speed-dial location with the new speed-dial button.

You can use the Speed-Dial feature even if your endpoint does not have

programmable feature buttons. 

To store a speed-dial number, use the Station Speed-Dial Programming feature code
to program the number in a speed-dial location. Use the following table to list the
numbers that you store in speed-dial locations 0-9.

 0 _______________________  5 _______________________
 1 _______________________  6 _______________________
 2 _______________________  7 _______________________
 3 _______________________  8 _______________________
 4 _______________________  9 _______________________