TP-LINK AV500 TL-WPA4230P KIT User Manual
Product codes
TL-WPA4230P KIT
TL-WPA4230P
AV500 Passthrough Powerline WiFi Extender
21
DTIM Interval - Determines the interval of the Delivery Traffic Indication Message (DTIM). You can
specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the
DTIM Interval is the same as Beacon Interval.
specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates the
DTIM Interval is the same as Beacon Interval.
Enable WMM - WMM function can guarantee the packets with high- priority messages being
transmitted preferentially. It is strongly recommended that this function be enabled.
transmitted preferentially. It is strongly recommended that this function be enabled.
Enable Short GI - This function is recommended for it will increase the data capacity by reducing
the guard interval time.
the guard interval time.
Enable AP Isolation - Isolates all connected wireless stations so that wireless stations cannot
access each other through WLAN.
access each other through WLAN.
Note:
If you are not familiar with the setting items on this page, it's strongly recommended that you keep the
provided default values; otherwise, it may result in low wireless network performance.
provided default values; otherwise, it may result in low wireless network performance.
3.4.5 Wireless Statistics
Selecting Wireless > Wireless Statistics will allow you to see the wireless transmission information in
the following screen shown in Figure 3-17. This page shows MAC Address, Current Status, Received
Packets and Sent Packets for each connected wireless station.
the following screen shown in Figure 3-17. This page shows MAC Address, Current Status, Received
Packets and Sent Packets for each connected wireless station.
Figure 3-17 Statistics of the device attached wireless stations
MAC Address - Shows the connected wireless station's MAC address.
Current Status - The connected wireless station's running status, one of STA-AUTH / STA-ASSOC
/ STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnected.
/ STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN / Disconnected.
Received Packets - Packets received by the station.
Sent Packets - Packets sent by the station.
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click the Refresh button.
connected wireless stations, click the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to the
next page and click the Previous button to return to the previous page.
next page and click the Previous button to return to the previous page.
Note:
This page will be refreshed automatically every 5 seconds.